Forums Faceting Machines new ultra tec

  • libram11

    Member
    December 29, 2022 at 3:18 am

    transfer pavilion to table should not involve your machine at all. The transfer and its alignment is 100% in your transfer fixture and its use. If you experience a shift the first question to ask, is the dop keyed or not. If dops keyed are both matching and machined the same if not keyed it is on your extra alignment methods before locking into the quill axis. One can and many do easily transfer a keyed dop with a stone to a round dop for table facets, it just takes more work and possibly tools to adjust the alignment after the transfer back to 100% alignment with the quill axis.

  • gemmakermz

    Member
    March 14, 2023 at 11:17 am

    i teach faceting. if you are now cutting the top, DO NOT cut strait down to girdle. cut a small ways, then cut the girdle row of facets going around matching the new one to one just cut and when you get all the way around you can see if it matches and if not which way you need to adjust the horizontal cheater to recut a little more till you get a good match, then cut down to girdle area.
    gemmakermz@cs.com

  • playcarry

    Member
    October 19, 2023 at 10:57 pm

    Your machine shouldn’t be used at all to transport the pavilion to the table. Your transfer fixture and how you use it account for 100% of the transfer and its alignment. The first thing to check if you experience a shift is whether the dop is keyed or not. If the dops’ keys match and are identically machined, you can use further alignment techniques before locking them into the quill axis.
    @geometry dash world

  • salmawisoky85

    Member
    December 26, 2023 at 9:22 pm

    Flappy Bird game is so difficult that it makes players both angry and funny, and find it difficult to play but extremely interesting.

Log in to reply.