-
Dopping, UV cure adhesive
Team,
Has anyone used UV cure adhesives for dopping, if so what band do you use and what do you use to remove the adhesive?
Thanks
Jim -
2 Replies
-
Acetone is really the only effective solvent. It requires some soaking, a few hours after you are finished cutting a stone. To transfer I use a small butane torch to heat the dop stick that I am removing. First I wrap the dop and stone to be retained with a wet tissue and then carefully heat the dop I am removing. I use a needle nose to pull off the heated dop. Never had any problem over heating the stone just do not heat the dop too much.
Doug -
Doug,
Thanks for the information.
Jim
Log in to reply.