Forums Techniques, Tricks, and Tips Adjusting the Index when Stone falls off the Dop Reply To: Adjusting the Index when Stone falls off the Dop

#6850

Tom Mitchell
Keymaster
@tommitchell

If you are using a Facetron, you will need to loosen the securing nut for the quill to allow the quill to rotate freely then go through the same procedure as described above. Once you find the flat spot, tighten the nut up again. But remember to readjust the quill after you are finished back to the ZERO position or you will have problems with every stone you cut after that.

Tom Mitchell