Forums Gemology China Basket Mould manufacturers

1 voice, 0 replies
Viewing 1 post (of 1 total)
  • Author
  • #7734


    Basket Injection Mould
    Part SizePer sample or part drawing
    Surface FinishPolishing or texture
    Part MaterialPP, PE
    Mold cavitySingle cavity
    Mold SteelP20,718
    Mold steel treatment wayHeat treatment
    Mold TypeHot runner or cold runner
    Mold life0.8million shots
    1st. Test mold time50days
    Mold drop wayAir valves and ejector pins
    PackageSpraying the anti-rust agent and oil mix with butter outside of the mold, then covering the PE film and put it in the wooden case.
    For laundry basket, normally there is PE flexible one, and PP one with rattan design to be in light weight.
    For rattan design, there are 4 sliders, so good fitment with slight parting line is very important, also must keep the movement of 4 sliders to be the same.
    Once we use the precision machining to make the rattan, the rattan can be continuous and smooth; otherwise the pattern does not look nice.
    Machining center
    1. High speed CNC machines
    Actually, there is different machining to make one mould, such as rough CNC machining, high speed CNC machining, normal engraving machining, precision engraving machining, depth drilling machining, normal drilling machining, and wire cutting includes low-speed wire cutting, medium-speed wire cutting, fast wire cutting ,usually making different machining to finish one mould.
    What is the difference between high speed CNC machining and normal CNC machining?
    The size is more accurate for high speed CNC machining, because the machine can make most of surfaces without change the standard surface.
    If use 5-axis CNC machining, it can machine all the surfaces without change the standard surface, so the size will be much more accurate.
    2. CNC precision engraving machines
    3. Depth drilling machins
    Q1: Why does the mould cost is high for rattan basket mould?
    A: We calculate the mold cost per the mould steel and the time of machining, for rattan design, it has to take more time on the machining, so the cost in increased.
    Q2: Which mold steel do you usually use for plastic laundry basket mould?
    A: Usually they are P20 and 718 steel, also depends on the requirements of client.
    Q3: What鈥檚 the payment term in your company?
    A: Usually 40% T/T as the advance payment, and the balance can be remitted before shipment by T/T, LC at sight, west union etc.
    Welcome to send mould inquires for foldable feet bath tube basin mould and other injection mold.China Basket Mould manufacturers

Viewing 1 post (of 1 total)
  • You must be logged in to reply to this topic.