Forums Faceting Machines Fac-Ette Faceting Machine

14 replies, 6 voices Last updated by erniehawes 7 years, 9 months ago
Viewing 15 posts - 1 through 15 (of 15 total)
  • Author
    Posts
  • #2106

    Larry Huffman
    Participant
    @larryhuffman

    Hi Just bought a machine from Roger Dery of Spectral Gems. Very well taken care of and just refurbished by Fac-Ette in factory a month before they closed in 2012. Looking for a source for a 64 tooth index, additional Dops, and the Belt for the drive. If you have any info on these please post. Thanks Larry Huffman

    #2109

    Ken Michalek
    Participant
    @kenmichalek

    You might want to get in touch with Tom Maxwell. He has a bunch of that kind of stuff.

    #2143

    Tom Maxwell
    Participant
    @tmax

    I don’t have any drive belts at the present, but should have a source after I get back from Tucson, 4-5 weeks. I have several new index gears and will check tomorrow and let you know.

    Tom Maxwell
    tmm5111@gmail.com

    #2146

    Larry Huffman
    Participant
    @larryhuffman

    Thanks Tom, I will be at the Tucson frolic Thursday & Friday taking the faceting class if you want to bring a couple with you. Larry

    #2151

    Tom Maxwell
    Participant
    @tmax

    I checked my shop and I don’t have a 64 index for the GM II. I do have a couple of new 96 indexes for $65.00 each if anyone needs one.

    Tom

    #2166

    Larry Huffman
    Participant
    @larryhuffman

    Thanks for checking Tom. See you in Tucson. Larry

    #2175

    davidwilliams
    Participant
    @davidwilliams

    I have one for GM-II – brand new never used it. I could sell it to ya.
    I guess $65.00 is price. Bunch of other things also – rough etc.
    When is the Tucson frolic?

    Dwilliams2@bak.rr.com

    #2176

    Tom Maxwell
    Participant
    @tmax

    Hi David,

    The Tucson Frolic is next week. Feb. 4, 5, & 6 at the Old Pueblo Lapidary Club – 311 North Dale Avenue, Tucson.

    Complete information is shown on the right side of the welcome page.

    https://usfacetersguild.org/usfg-tucson-factors-frolic-2016/

    #2178

    davidwilliams
    Participant
    @davidwilliams

    Thanks Tom for info on Tucson Frolic

    This is to Larry,
    Guess I didn’t say but what I have is a 64 tooth index for GM-II also have many types of rough that I have collected over the years.

    Dwilliams2@bak.rr.com

    #2181

    Larry Huffman
    Participant
    @larryhuffman

    Hi David, I will take the 64 tooth GM II. Are you going to the frolic? If so I will meet you there and buy it. Other wise we will have to wait till Next week. Larry

    #2187

    davidwilliams
    Participant
    @davidwilliams

    Well my wife won’t let me go to Tucson – so send me an e-mail to DWilliams2@bak.rr.com
    or call me at Ph 661-319-7677
    and we cam make arrangements
    Dave

    #2205

    mikesassaman
    Participant
    @mikesassaman

    I am looking for a Fac-ette Transfer jig. Does anyone know where I might find one?
    Mike
    Reading, PA

    #2216

    Larry Huffman
    Participant
    @larryhuffman

    Hi Mike, Try Ernie Hawes at… (Please do not post other people’s emails without permission. Thank you, admin) He may have one for sell. Larry

    #2218

    mikesassaman
    Participant
    @mikesassaman

    Thanks Larry, I write to Ernie.
    Mike

    #2241

    erniehawes
    Participant
    @erniehawes

    I supplied Larry with a belt at Tucson. Anybody who needs one feel free to contact me.

    Ernie Hawes

Viewing 15 posts - 1 through 15 (of 15 total)
  • You must be logged in to reply to this topic.