-
Need Graves Mark 5XL Drive Belt
It’s impossible to get in touch with Graves. If I can’t get in touch with them by phone, I’m surely not ordering online from them. Does anyone know any specs on the drive belt so I can order some from Grainger??
Tnx,
Bill Harbour
-
3 Replies
-
I believe Graves is out of business. I assume your belt is shot. If so, cut it and measure the length exactly. Go to McMaster-Carr, find the right shape and length, and you are ready to go. I replaced the belt on my Raytech Shaw myself since the current owner only wants to sell new machines….
-
OK…their website is still up and the phone system answers the phone with a message. But I’ve tried many times over the last 6 months or so to get in touch with them and no go. I did order a belt from Grainger.
Thanks,
-
for the small belts on the faceting machines i’ve found a green belt making material on ebay sold out of china in different diameters that works great to replace belts with. you cut the length you need and using heat, i used an alcohol lamp, you weld the ends together. i’ve got two machines running with that. and cheap too as you can buy a length to make more than one… contact me by email and i can point you to that ebay item if still available.
gemmakermz@cs.com
Log in to reply.